2016 Mercedes-Benz GLE350
CRM Mitchell1 2022-11-14T22:58:21+00:00
Mileage
54,492
Service Date
10/31/2022
Services Performed
- Lubricate and check chassis. Change oil and oil filter. Check air filter and breather filter. Check all fluid levels and tire pressures. Preform basic safety inspection. Road test vehicle. -Reset maintenance remainder
- The first Service A is due at 10000 miles or 12 months, then every 20000 miles or 24 months. TIRE PRESSURE MONITORING SYSTEM SENSORS – ACTIVATE WATER DEFLECTOR – CLEAN – [Clean visible area of water deflector.] BRAKE FLUID – INSPECT – [In the event of fluid loss, determine cause and perform repair.] BRAKE SYSTEM – INSPECT – [Visually check condition of brake pads/linings, condition of brake disks.] COOLANT LEVEL – INSPECT – [Check coolant level in coolant expansion tank.] HORN OPERATION – INSPECT – [Check horn for correct function.] PARKING BRAKE – INSPECT – [Function test only: Vehicles with 4MATIC: If brake test is carried out on a dynamometer, the brake test may not exceed 10 seconds on each axle. You could otherwise damage the drive train or the brake system.] TIRES – INSPECT – [Correct tire inflation pressure, Correct inflation pressure in spare tire (where applicable). Check TIREFIT sealant expiration date (where applicable). If expired, replace it. Activate Tire Pressure Monitoring System.] TRUNK LIGHTING – INSPECT – [Check trunk/cargo compartment lighting for correct function.] VEHICLE – INSPECT – [Check vehicle's exterior for damage in visible area.] WARNING & INDICATOR LAMPS – INSPECT – [Inspect warning and function indicator lamps in the instrument cluster. Check illumination of the instrument cluster and interior lighting for correct function.] WINDSHIELD – INSPECT – [Check for damage.] AIR FILTER – REPLACE – Activated Charcoal Filter ENGINE OIL – REPLACE ENGINE OIL FILTER – REPLACE SERVICE INTERVAL INDICATOR/DISPLAY – RESET – [Read out service data from instrument cluster and reset ASSYST PLUS service interval display. If the service/maintenance work has not, or has only partially been carried out after the ASSYST PLUS service interval display has been reset, the maintenance computer must be reset to its original settings.]
- Remove wheels from vehicle. Inspect brakes, rotate front tires to rear and rear to front in order to wear tires evenly.Re install wheels to vehicle and torque lug nuts to manufacturer's specifications. Road test vehicle.
SHENNY C. gave our service a 5 star review on 11/13/2022
