Lubricate and check chassis. Change oil and oil filter. Check air filter and breather filter. Check all fluid levels and tire pressures. Preform basic safety inspection. Road test vehicle.
ENGINE OR TRANSMISSION MOUNT – Remove & Replace – 1500,V8,4.8L Eng,4WD Trans,Rear
TIRE PRESSURE SENSOR – Remove & Replace – 1500,2500 HD One – [Includes: Sensor Location ID learn procedure.]
TIRE PRESSURE SENSOR – Remove & Replace – 1500,2500 HD Each Additional – [Includes: Sensor Location ID learn procedure.]
WIPER MOTOR MODULE – Remove & Replace
OUTPUT SHAFT SEAL – Remove & Replace – 1500 Both – [Includes: R&I Drive Axle Housing.]
Disconnect the Positive Crankcase Ventilation (PCV) hose at the air box and then install a manometer to the fresh air line. Start the vehicle and let the engine idle. Check to see if there is a positive or negative pressure on the manometer gauge. Increase engine RPM to 1500 RPM for 2-3 seconds. Determine if there is positive or negative pressure on the manometer gauge. If the manometer gauge indicates zero or positive pressure when the engine RPM is raised, the PCV port in the intake manifold needs to be unplugged. The intake manifold will need to be removed to unplug the PCV port.
Lubricate and check chassis. Change oil and oil filter. Check air filter and breather filter. Check all fluid levels and tire pressures. Preform basic safety inspection. Road test vehicle.
MARJORIE L. gave our service a 5 star review on 5/5/2022
2010 Chevrolet Equinox CRM Mitchell1
2022-05-06T22:03:34+00:00
Lubricate and check chassis. Change oil and oil filter. Check air filter and breather filter. Check all fluid levels and tire pressures. Preform basic safety inspection. Road test vehicle.
SPARK PLUGS – Remove & Replace – In-Line4 All
CABIN AIR FILTER – Remove & Replace
AIR CLEANER ELEMENT – Remove & Replace
CAMSHAFT POSITION SENSOR – Remove & Replace – In-Line4 One,Intake or Exhaust
When vehicle was originally scanned for trouble codes, technician states that one of the codes was P0131 heated oxygen sensor circuit low voltage sensor 1, technician also noticed that exhaust manifold was cracked causing false reading from oxygen sensor, is recommended to replace sensor as well.
When technician took vehicle for test drive noticed that front suspension was making a clunking sound, vehicle was brought to the shop and found broken front stabilizer link, recommended to replace front both links
MARJORIE L. gave our service a 5 star review on 3/2/2022
2010 Chevrolet Equinox CRM Mitchell1
2022-03-03T23:04:25+00:00
-Disconnect battery terminals, clean and apply anti corrosive protector to battery terminals, remove old battery and install new one, reconnect battery and re test.
MARJORIE L. gave our service a 5 star review on 6/3/2021
2010 Chevrolet Equinox CRM Mitchell1
2021-06-04T22:05:31+00:00
Lubricate and check chassis. Change oil and oil filter. Check air filter and breather filter. Check all fluid levels and tire pressures. Preform basic safety inspection. Road test vehicle.
STEVE R. gave our service a 5 star review on 5/22/2021
2017 Chevrolet City Express CRM Mitchell1
2021-05-23T22:02:14+00:00
Technician observed that exhaust is hanging and noticed that flex pipe is broken due to missing exhaust hanger bracket support. Repair and install new flexible pipe, fabricate bracket hanger. Total price includes parts and labor
KATHY gave our service a 5 star review on 3/17/2021
2013 Chevrolet Cruze CRM Mitchell1
2021-03-18T22:01:54+00:00